SELECT YOUR FABRIC
YOUR SHIRT DESIGN
shirt
ADVANCED SIZE OPTIONS
CHECKOUT
Fabric
Sizes
New to Custom Made? Press below to get started
GET STARTEDAlready have saved sizes? Log in below
LOGIN FOR SAVED SIZES
I HAVE A SHIRT THAT FITS ME WELL
Use measurements from a shirt you already like.
I WANT TO START FROM SCRATCH
Use your body measurements and tell us how you like it to fit.
SHIRT MEASUREMENTS
Select a shirt size that is your “Base size”, and then make adjustments by pressing plus or minus.
BASE SIZE:
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
Measure the space between the top darts, then between the bottom darts. The upper section should be 1 cm (or 0.5 in) wider than the lower section. Adjust the jacket’s position until this difference is achieved.
STEP 3:
Begin at the lowest point of the left armhole and measure straight across to the matching point on the right side.
Keep the measuring tape straight.
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
From the left edge of the jacket, take a horizontal measurement at the midpoint just below the top button.
Keep the measuring tape straight.
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
Start at the center base of the collar—where the back seam meets the collar—and measure straight down to the bottom hemline.
Keep the measuring tape straight.
ADVANCED SIZE OPTIONS
SIZE PASSPORT NAME:
SELECT BASE SHIRT SIZE
REGULAR
(between 167 cm — 187 cm)-
TAILORED FIT
The tailored fit is somewhat V-shaped — meaning that the shoulders are wider, and then the upper waist of the shirt is slightly tapered.
-
CASUAL FIT
The casual fit is more loose throughout the entire shirt — meaning that the shoulders, chest, upper waist and hip are wider. Also, the biceps and sleeve opening are somewhat wider as well.
HOW TO MEASURE
LOGIN FOR SAVED SIZES
Login if you have an account with us where your measurements are stored from previous orders:
BODY MEASUREMENTS
Enter your body measurements and fit preference. Our AI system will suggest garment measurements for you. You can make adjustments by pressing plus or minus.
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar pointing upward and the sleeves resting naturally. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
From the point where the front dart intersects with the pocket, measure straight down by 7 cm / 2.8 in.
STEP 3:
Take a horizontal measurement from the left edge of the jacket straight across to the right edge.
Keep the measuring tape straight.
ADVANCED SIZE OPTIONS
Fit
-
Tailored
-
Casual
BASE SIZE:
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
Measure the space between the top darts, then between the bottom darts. The upper section should be 1 cm (or 0.5 in) wider than the lower section. Adjust the jacket’s position until this difference is achieved.
STEP 3:
Begin at the lowest point of the left armhole and measure straight across to the matching point on the right side.
Keep the measuring tape straight.
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
From the left edge of the jacket, take a horizontal measurement at the midpoint just below the top button.
Keep the measuring tape straight.
STEP 1:
Place the fully buttoned jacket face up on a flat surface, with the collar and sleeves pointing downward. Smooth out any wrinkles or folds using your hands to ensure the fabric lies flat.
STEP 2:
Start at the center base of the collar—where the back seam meets the collar—and measure straight down to the bottom hemline.
Keep the measuring tape straight.
