SELECT YOUR FABRIC
YOUR TROUSERS DESIGN
trouser
ADVANCED SIZE OPTIONS
CHECKOUT
Fabric
Sizes
New to Custom Made? Press below to get started
GET STARTEDAlready have saved sizes? Log in below
LOGIN FOR SAVED SIZES
I HAVE A TROUSER THAT FITS ME WELL
Use measurements from a trouser you already like.
I WANT TO START FROM SCRATCH
Use your body measurements and tell us how you like it to fit.
LOGIN FOR SAVED SIZES
Login if you have an account with us where your measurements are stored from previous orders:
TROUSERS MEASUREMENTS
Select a trousers size that is your “Base size”, and then make adjustments by pressing plus or minus. Also, specify your fit preference.
BASE SIZE:
1) Lay the completely buttoned & zipped trouser flat on a table face up, use your hands to gently extend and flatten out the fabric.
2) Begin by measuring from the edge of the waistband, down to the 1cm/0.5in point. Make note of this point.
3) Starting at the left edge, measure the waistband at the 1cm point noted in step two, all the way to the right side.
ADVANCED SIZE OPTIONS
SIZE PASSPORT NAME:
SELECT BASE TROUSERS SIZE
SHORT
(between 160 cm - 174 cm)REGULAR
(between 175 cm - 186 cm)LONG
(taller than 187 cm)-
TAPERED FIT
Trousers become tighter/more narrow in the leg opening.
-
STRAIGHT FIT
Trousers are straight meaning that trousers have similar width around the thighs, calves and leg opening.
-
WIDE FIT
Trousers are wide in both thigh and leg opening - creating a straight cut - yet with a wider fit.
HOW TO MEASURE
BODY MEASUREMENTS
Enter your body measurements and fit preference. Our AI system will suggest garment measurements for you. You can make adjustments by pressing plus or minus.
Stand straight with a normal posture. Measure your body height from tip to toe.
Measure the circumference of your waist (where you want your trousers to be fitting around your waist). Note: our trousers are usually a bit more high waisted and therefore we recommend that you measure slightly higher than you would with normal pants.
ADVANCED SIZE OPTIONS
Rise
-
This refers to where the trousers' waistline is positioned on your body. If you prefer a high-waisted fit, then choose High rise. If you wish the rise to be neither low nor high, then choose Medium rise. Lastly, if you want the trousers to be seated low, then pick Low rise.
Low
-
This refers to where the trousers' waistline is positioned on your body. If you prefer a high-waisted fit, then choose High rise. If you wish the rise to be neither low nor high, then choose Medium rise. Lastly, if you want the trousers to be seated low, then pick Low rise.
Medium
-
This refers to where the trousers' waistline is positioned on your body. If you prefer a high-waisted fit, then choose High rise. If you wish the rise to be neither low nor high, then choose Medium rise. Lastly, if you want the trousers to be seated low, then pick Low rise.
High
Shape
-
Straight cut: Trousers are straight meaning that trousers have similar width around the thighs, calves and leg opening.
Tapered cut: Trousers become tighter/more narrow in the leg opening.
Boot cut: Trousers become much wider in the leg opening compared to the thigh.
Wide cut: Trousers are wide in both thigh and leg opening - creating a straight cut - yet with a wider fit.
Extra Slim cut: Trousers are extra slim around the thighs, calves and leg opening.
Straight
-
Straight cut: Trousers are straight meaning that trousers have similar width around the thighs, calves and leg opening.
Tapered cut: Trousers become tighter/more narrow in the leg opening.
Boot cut: Trousers become much wider in the leg opening compared to the thigh.
Wide cut: Trousers are wide in both thigh and leg opening - creating a straight cut - yet with a wider fit.
Extra Slim cut: Trousers are extra slim around the thighs, calves and leg opening.
Tapered
-
Straight cut: Trousers are straight meaning that trousers have similar width around the thighs, calves and leg opening.
Tapered cut: Trousers become tighter/more narrow in the leg opening.
Boot cut: Trousers become much wider in the leg opening compared to the thigh.
Wide cut: Trousers are wide in both thigh and leg opening - creating a straight cut - yet with a wider fit.
Extra Slim cut: Trousers are extra slim around the thighs, calves and leg opening.
Wide
BASE SIZE:
1) Lay the completely buttoned & zipped trouser flat on a table face up, use your hands to gently extend and flatten out the fabric.
2) Begin by measuring from the edge of the waistband, down to the 1cm/0.5in point. Make note of this point.
3) Starting at the left edge, measure the waistband at the 1cm point noted in step two, all the way to the right side.
